| Standard No | Product Type and Official Definition |
|---|---|
| EN 120:2002 | Wood-based panels – Determination of formaldehyde content – Extraction method called the perforator method |
| EN 300: 2019 | Oriented Strand Boards (OSB) – Definitions classification and specifications |
| EN 310: 2002 | Wood-based panels – Determination of modulus of elasticity in bending and of bending strength |
| EN 313-1 (2020) | Plywood classification |
| EN 313-2 (2020) | Plywood terminology |
| EN 314-1 (2020) | Plywood – Bond quality – Test methods |
| EN 314-2 (2019) | Plywood – Bond quality – Requirements |
| EN 315 (2020) | Plywood – Tolerances for dimensions |
| EN 317 (2002) | Particleboards and fibreboards – determination of swelling in thickness after immersion in water |
| EN 318: 2002 | Wood-based panels – Determination of dimensional changes associated with changes in relative humidity |
| EN 319 (2020) | Particleboards and fibreboards – Determination of tensile strength perpendicular to the plane of the board |
| EN 321 (2020) | Wood-based panels – Determination of moisture resistance under cyclic test conditions |
| EN 322 (2002) | Wood-based panels – Determination of moisture content |
| EN 323 (2002) | Wood-based panels – Determination of density |
| EN 324-1 (2002) | Wood-based panels – Determination of dimension of boards Determination of thickness, width and length |
| EN 324-2 (2002) | Determination of squareness and edge straightness |
| EN 325 (2018) | Wood-based panels – Determination of dimensions of test pieces |
| EN 326 | Wood-based panels – Sampling, cutting and inspection |
| EN 326-1 (2002) | Sampling and cutting of test pieces and inspection |
| EN 326-2:2010+A1:2014 | Initial type testing and factory production control |
| EN 326 – 3 (2019) | Inspection of an isolated lot of panels |
| EN 335:2013 (2018) | Durability of wood and wood-based products – Definitions of use classes |
| EN 350: 2016 | Durability of wood and wood-based products – Testing and classification of the durability to biological agents of wood and wood-based materials |
| EN 408:2010+A1:2012 | Timber structures – Structural timber and glued laminated timber – Determination of some physical and mechanical properties |
| EN 594: 2011 | Timber structures – Test methods – Racking strength and stiffness of timber framed wall panels |
| EN 596: 1995 | Timber structures – Test methods – Soft body impact test of timber framed walls |
| EN 635-1 (2002) | Plywood – Classification by surface appearance – General |
| EN 635-3 (2020) | Softwoods |
| EN 635-5 (2020) | Parameters of ability for finishing, guidelines |
| EN 636: 2012+A1:2015 | Plywood – Specification |
| EN 717 | Wood – based panels – Determination of formaldehyde release |
| EN 717-1 (2020) | Formaldehyde emission by the chamber method |
| EN 717-2 (2002) | Formaldehyde release by the gas analysis method |
| EN 789 (2021) | Timber structures – Test methods – Determination of mechanical properties of wood-based panels |
| EN 1058: 2009 | Wood-based panels – Determination of characteristic 5 percentile values and characteristic mean values |
| EN 1072 (2002) | Plywood – Description of bending properties for structural plywood [Withdrawn in June 2012, however, will still be referenced in other standards until they are reviewed] |
| EN 1084 (2002) | Plywood – Formaldehyde release classes determined by the gas analysis method [Withdrawn in June 2012, however, will still be referenced in other standards until they are reviewed] |
| EN 1087-1 (2002) | Particleboards – Determination of moisture resistance – Boil test |
| EN 1156 (2019) | Wood-based panels – Determination of duration of load and creep factors |
| EN 1195: 1998 | Timber structures – Test methods – Performance of structural floor decking |
| EN 1438: 1998 | Symbols for timber and wood-based products |
| EuroCode 5 (EN 1995-1-1: 2004 +A2: 2014) | EN 1995-1-1: 2004 +A2: 2014 Eurocode 5: Design of timber structures – General – Common rules and rules for building |
| EN 12369-1:2001 | Wood-based panels – Characteristic values for structural design OSB, particleboard and fibreboards |
| EN 12369-2:2011 | Plywood |
| EN 12871: 2013 | Wood-based panels – Determination of performance characteristics for load bearing panels for use in floors, walls and roofs |
| EN 13501-1:2018 | Fire classification of construction products and building elements Classification using test data from reaction to fire tests +A1: 2009 |
| EN 13986: 2004+A1:2015 | Wood-based panels for use in construction – Characteristics, evaluation of conformity and marking |
| EN 14272 (2018) | Plywood – Calculation method for some mechanical properties |
| EN 14279:2004+A1:2009 | Laminated Veneer Lumber (LVL) – Definitions, classification and specifications |
| EN 14374:2004 | Timber structures – Structural laminated veneer lumber – Requirements |
| EN 15804:2012+A2:2019 | Sustainability of construction works – Environmental product declarations – Core rules for the product category of construction products |
| EN 16733:2016 | Reaction to fire tests for building products – Determination of a building product’s propensity to undergo continuous smouldering |
| EN ISO 12460-3: 2020 | Wood-based panels – Determination of formaldehyde release – Gas analysis method |
| EN ISO 12460-5:2015 (2021) | Wood-based panels – Determination of formaldehyde release – Extraction method (called the perforator method) |
| PD CEN/TR 12872:2014 | Wood-based panels – Guidance on the use of load-bearing boards in floors, walls and roofs |
| DD CEN/TS1099: 2007 |